Steps that can make it easier to get in and out of the transport

The support legs are practical when the horse has to stand for a long time on a parked trailer, for example during a competition. The support legs are cranked down and effectively stabilize the trailer, which is also good for load training of horses.

This accessory upgrades from a regular cast ball coupling to a stabilizing friction coupling with pads against the ball.
However, the friction clutch requires that the tow ball is always kept clean and dry from dirt in order for it to be fully effective. (The image shows a lock for the ball coupling mounted)

The standard version of the trailer can be registered between the following total weights: 1300, 1400, 1500, 1600, 1650, 1700, 1750, 1800, 1850, 1900, 1950, 1990 or 2400 kg.

With wireless camera surveillance from the Luda TrailerCam brand, you can see your horse from the car during the entire transport. The image is displayed on a 5-inch monitor. An extra camera at the back can be used as a reversing camera. With a push of a button on the monitor, you switch to the rear camera.

When the trailer is equipped with inner doors when transporting two horses, for example a mare with a foal, this pole is needed to adjust the inner doors. It makes it possible to remove the septum. The inner doors open and close in the same way as when the partition is in place. The center post is easily mounted with a spring-loaded locking function. The picture shows a B50 equipped with center post for box.

A sliding window provides more light in transport, the horse has the opportunity to see out and can be opened for extra ventilation. The window has a wind deflector that reduces the noise level and turbulence from an open window.

The electric fan with LED lighting improves ventilation in the carriage and lowers the temperature. The electric fan requires a tow truck with a 13-pin trailer socket. Spiral cord for 13-pin socket included.

Aluminum rims give the trailer a more exclusive look. Choose between the classic aluminum colored and the black model. You can choose studded or studless winter tires.

Aluminum rims give the trailer a more exclusive look. Choose between the classic aluminum colored and the black model. You can also choose studless all-year tires (M+S).

The feed fence is made of a durable material. It is fastened with rubber straps and carabiner hooks. The single feed hedges provide greater flexibility. For example, if you drive a horse, you only use a feed fence, which increases the turning room at the front of the trailer.

The boom mattress is removable and increases the horse's comfort.

The neck strap attached to the front bar prevents the horse from jumping over the front bar.

Anchorages for transport halter shafts are on the center post and wall. The transport halter shaft is adjustable lengthwise and made of sturdy nylon

The new model's full rear boom with click lock makes it possible to remove the partition when transporting two horses, for example a mare with a foal. The boom folds outwards and can be folded down to the left of the tailgate.

A pony attachment for the bar at the front makes it possible to lower the bar further when transporting a small horse.

The stallion guard prevents the horses from biting or otherwise getting at each other's heads. Transport will therefore be calmer. The stallion covers are available in various combinations and materials, from padded to plywood and ABS plastic.

Prevents smaller horses or foals from getting under the front bars.

Inner doors instead of bars increase safety when loading. The doors have a practical click lock that closes quickly. It is possible to change between the inner door and the boom. The inner doors can be equipped with a wear protection in ABS plastic.

Bunching that pads the outer walls and middle wall and thus increases the horse's comfort.

The rubber partition allows the horse to stand more wide-legged in the stall, which some horses do if they have the opportunity. In this way, the horse maintains its balance more easily during travel. The picture shows a B60 equipped with a rubber partition and with bundling in the interior.

Sulky support mounted on the tailgate to facilitate transport of, among other things, the training buggy.

Sulky mount for tailgate makes it possible to bring one or more sulkys, shackles or similar bulky equipment. The mounts are rubberized to eliminate abrasion. Rubber straps keep the load in place.

Plug supplied with a 7- or 13-pin spiral cable, depending on which socket the tractor has.

With this tool, it is easier to loosen tightly tightened wheel nuts, compared to the tractor's regular wheel nut tool. Reversible sleeve for 17 and 19 mm wheel nuts. The wheel nut tool is mounted in the front.

Spare tire 185/65 R15 summer with steel rim. An alternative to buying a spare tire is to fasten an existing summer or winter tire to the tensioning strap located at the front of the trailer.

Jack that is fastened to the front of the trailer.

Fire extinguisher with holder that is fixed to the front of the trailer.

The easy-to-handle mobile saddle cabinet is made of stable plastic. Easy-rolling and massive wheels make it easy to pull the cabinet in and out of the horse transport. The cabinet can be fastened with rubber straps inside the transport at the front. The saddle cabinet has room for two saddles. There are hooks in the cabinet and on the inside of the door as well as compartments under the opening lid. The saddle locker is lockable. Dimensions: Height 117 cm Depth 78 cm Width 58 cm. Weight 30 kg.

Flexible stool that can be folded up and attached to the wall, height 39 cm.

Protection for the draft that helps to keep out the effects of the weather.

The lock reduces the risk of theft in two ways: with the lock in the locked position, the trailer cannot be connected to a foreign tractor. The trailer can also be locked to the car's towbar, and remain locked during travel. The lock is approved by the Theft Protection Association.